[MN2] Medianav Evolution Reverse Camera And Rear Speaker Activation

Activate Rear camera view and Rear Speaker in MediaNav Evaluation 7.0.5 Kwid Full 

[facebook-page-plugin href=”mediana.tkwebsite/” width=”200″ height=”50″ cover=”true” facepile=”true” tabs=”timeline,events,messages” cta=”false” small=”false” adapt=”true” link=”true” linktext=”” ]

Step 1:

Download the downgrade Medianav_705 to 603.zip from the below

Unzip the same and copy the upgrade.lgu file to a formatted pendrive,

Plug to the MediaNav, allow to upgrade

Once it is completed, the device is downgraded to 6.0.3 version.

Step 2:

Download the Dboot_MN2.rar

Unzip the same and copy the upgrade.lgu file to a formatted pendrive,

Plug to the MediaNav, allow to upgrade

The Dboot_1.5 This is just a small software running during start up to restart quickly under Wince. you can access your Windows CE when starting your MediaNav made a sliding your finger on the Renault and Dacia logo from left to right, a little appeared window click Yes,

Now you can access to WINCE platform ,

Step 3:

Download the dmicom_test_evo.exe for the below

copy this to a pendrive

While power-ON the Medianav,

touch the RENAULT logo and move from left to right as shown in the video

WINCE will boot, Goto Device / MD , open the dmicom_test_evo.exe

MICOM menu will open,

GO to environment P1 Tap, change the setting as Fitted in Rear view camera and Rear speaker tab .

Write the ECU/Config option,

Goto Rear view camera tab, and change the guideline to X87

click the Enregister icon and save all configuration

Restart the MediaNav

Step 4:

Download the upgrade.lgu 7.0.5.zip for the below

Unzip the same and copy the upgrade.lgu file to a formatted pendrive,

Plug to the MediaNav, allow to upgrade

Once it is completed, the device is upgraded to the factory version 7.0.5.

Contact:-8891618865

Video Tutorial

Tutorial for Reverse Cable Connections : 

Tutorial for Speaker Cable Connection : 

Good Luck
Harness available at below site or you can get it from Store.

5 thoughts on “[MN2] Medianav Evolution Reverse Camera And Rear Speaker Activation”

  1. Hello,
    I have a problem with media nav evolution 9.1.3 – System not configured. Please Connect Diag tool.
    I have to make a new setting in Micom manager like you do in video. But I have 4 cameras in the new Duster (2018) front, rear, left and right. Can I use your dmicom_test_evo.exe (version 6.0.3) which you used in video for setting rear camera ?? I will know setting my four cameras? It is possible ?? When I had Micom manager 9.1.3.0210 ???
    Thank you for your answer.
    best regards

Leave a Reply